|
|
|
|
|
|
WATER TREATMENT SYSTEMS
800-701-9914 |
Normally, it is not a good idea to shock a well on a regular basis. It is only recommended that a well be shocked one time, when it is a new well or if it tested positive for coliform or ecoli bacteria and has never been shocked before. If you have iron bacteria, sulfur odors or if it has been shocked before and the bacteria came back, it is best to treat that outside of the well so you do not create larger problems in the future. If you must shock the well then we would recommend you follow these instructions to do so.
Pour two gallons of regular unscented Clorox® bleach down into the well head. Let the chlorine sit in the well for an hour. Go to the farthest faucet from the well and turn on both hot and cold water all the way until you either smell chlorine, or you can test for chlorine using a swimming pool chlorine test kit. Once you smell chlorine, turn off the cold water and let the hot water continue to run until you once again smell chlorine. Hot water will usually take longer because the water has to work it's way through the hot water tank. Once you smell the chlorine on the hot water side shut off at that faucet and go and open up every faucet in and outside of the house including washing machines, hose bibs, dishwashers and flushing all toilets. Once you have chlorine at the farthest faucet all the other ones will generally come up quite quickly. Shut off all water every where and let it sit at least over night or for 24 hours if you can. After 24 hours turn all faucets on in the house until you no longer smell chlorine and flushing all toilets, running a full cycle in the washing machine and dishwasher while they are empty. That is it, you have now shocked your well and disinfected all your water lines. Remember, chlorine is very volatile, it is dangerous to work with in small or confined areas. Make sure the area is well ventilated. Also, you should wear safe clothing and equipment when shocking your well. Wear goggles to avoid contact with your eyes. Wear rubber gloves to protect your hands and rubber boots for your feet. Wear coveralls or waterproof clothing.
As always please do not hesitate to call and speak with one of our expert technician if we can assist you in answering any of your water treatment questions. |
|
WARNING: When it comes to treatment equipment you should NEVER do business with ANY company who does not have the same certifications as we do. It is just plain crazy. There are so many "Fly by night" companies out there that it should be the very FIRST rule in your decision making process. It is your first, and some times ONLY, line of defense. Just look at our home page to see our many appropriate certifications. You will find them all in the top third of the page. Budget Water® USA: 1.800.701.9914 email: budgetwater@budgetwater.com NOTE: Purchasing anything via phone or from this site means you have read, and agree to, all of the conditions of our: " terms- of- service" page. Culligan® is a registered trademark of Culligan®, Inc., RainSoft® is a registered trademark of RainSoft Water Conditioning company, Kinetico® is a registered trademark of Kinetico Incorporated, Hague® is a registered trademark of Wm. R. Hague Inc., Cuno® is a registered trademark of Cuno Incorporated, Rayne® is a registered trademark of Rayne Corporation, Ionics® is a registered trademark of Ionics, Incorporated, Ecowater® is a registered trademark of Ecodyne Corporation, Water-Right® is a registered trademark of Water-Right®, Inc. Budget Water International, Inc. is not affiliated with Culligan®, Inc., Culligan® is a registered trademark of Culligan®, Inc.,RainSoft® Water Conditioning Co., Kinetico® Incorporated, Wm. R. Hague®, Inc., Cuno® Incorporated, Rayne® Corporation, or Ecodyne Corporation, Water-Right®, Inc. Budgetwater® is a trademark of Budget Water International, Inc. This site is protected by copyright and trademark laws under U.S. law. All rights reserved.
Related Resources (1)(2)(3) *We manufacture most of our equipment from scratch. We use only premium national name brand components on all equipment that we sell. The same people that make equipment for many other national PREMIUM brand companies make them for us as well. The top two control valve makers are Fleck® and Autotrol™ we carry both types and many of the other top brands as well. Send mail to Company Webmaster with questions or comments about this web site.
|